Jz-500, Control Cable, 300/500 V, Flexible Cu/PVC/PVC (DIN VDE 0245)

JZ-500, Control Cable, 300/500 V, Flexible Cu/PVC/PVC (DIN VDE 0245)
Application
These cables are used for flexible use for medium mechanical stresses with free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air, as measuring and control cables in tool machines, conveyor belts, production lines in machinery production, in air-conditioning and in steel production. The cores have been numbered in such a way that there is no difficulty in recognising them, even if only a small piece of sheathing has been removed. The numbers have been underlined to avoid confusion. The earth core is laid in the outer layer. Selected pvc-compounds guarantee a good flexibility as well as an economic and fast installation.

Cable structure
Bare copper, fine wire conductors, according to DIN VDE 0295 cl. 5 and IEC 60228 cl. 5 Core insulation of special PVC Z 7225 Black cores with continuous white numbering according to DIN VDE 0293 (also available with other core colours)
Green-yellow earth core in the outer layer (3 cores and above)
Cores stranded in layers with optimal lay-lenght
Outer sheath of special PVC, TM2 to DIN VDE 0281part 1and HD 21.1, colour grey
Extensively oil resistant Chemical Resistance see table Technical Informations
PVC self-extinguishing and flame retar- dant, test method B according to VDE 0472 part 804 and IEC 60332-1.

Technical data
Control cables, special PVC Requirements adapted to DIN VDE 0245, 0281, 0293, 0295
Temperature range
flexing 5o C to +80o C
fixed installation 40o C to +80o C
Nominal voltage U0/U 300/500 V
Test voltage 4000 V
Insulation resistance
min. 20 MOhm x km
Minimum bending radius
for permanent approx. 7,5 x cable 0
Radiation resistance
up to 80 x 106 cJ/kg (up to 80 Mrad)