Al/Cu-Leiter XLPE-Isoliertes, dünnes/Dickes Stahlarmoriertes PE-/PVC-Ummanteltes Netzkabel für werkseitigen Preis

Basis Info

Modell Nr..

power cable

Art

Isolierte

Leitertyp

Stranded

Anwendung

U-Bahn

Leitermaterial

Kupfer

Mantelmaterial

PVC

Isoliermaterial

XLPE

Material Form

Runddraht

Anwendungsbereiche

Flammschutzmittel

Bescheinigung

ISO9001 ,
CE ,
CCC ,
RoHS

Zusätzliche Informationen.

Warenzeichen

Huatong

Verpackung

All Wooden, Coils or as Per Your Request Package

Herkunft

China

HS-Code

8544492100

Produktionskapazität

5000tons /Month

Produktbeschreibung

Al/Cu Conductor XLPE Insulated Thin/Thick steel armored PE /pvc Sheathed Power Cable for factory price
26/35kV, 21/35kV, 12/20 kV (24 kV), 8.7/10kV, 8.7/15kV, 6/6kV, 6/10kV.GB/T12706-2002 standard(The same as IEC60502).

Executive Standard:
It is manufacture under GB/T12706-2002 standard(The same as IEC60502).
Application:
It is used to transmit and distribute power in power transmission and distribution system of 35kV or lower.
It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry
and communication in complete replace of oil immersed paper insulated power cable and in partial replace
of PVC insulated power cable.
Using features:
1. Rated voltage: Uo/U: 26/35kV, 21/35kV, 12/20 kV (24 kV), 8.7/10kV, 8.7/15kV, 6/6kV, 6/10kV.
2. No. of core: Single-core, Three-core.
3. The highest allowed operating temperature of conductor for long-term working is 90oC. In short-circuit (Max. Long-term is no more than 5 seconds). The highest temperature for conductor is no more than 250.
4. D.C Resistance of the conductor complies with the stipulations of GB/T3956-1997.
5. The environment temperature should be no lower than 0 when lay. Otherwise it should be preheated.
6. The cable is laid without horizontal drop limit. The Min. Bending radius of three-core cable should be no smaller than 12 times of cable outer diameter.
7. Working Frequency Voltage Test:.
For cable with Uo of 3.6kV or lower: 2.5Uo+2kV/5min without puncture.
For cable with Uo of 3.6kv~18kV: 3.5Uo/5min without puncture.
For cable with Uo of 21kV and 26 kV: 2.5Uo/30min without puncture.
8. Partial Discharge Test: The discharge volume should be no more than 10pC under 1.73Uo for the cable.

Installation
This cable can be installed in duct, tray or direct burial. It is recommended that the installation instructions indicated
by the Local Electric Code, or any equivalent, be followed,so that the safeguarding of persons and the integrity
of the product will not be affected by eciencies in the installation.

This series includes:

Copper (aluminum) core, XLPE insulated and sheathed power cables.
Copper (aluminum) core, XLPE insulated, PE sheathed power cables.
Copper (aluminum) core, XLPE insulated, steel tape armoring PVC sheathed power cables.
Copper (aluminum) core, XLPE insulated, steel tape armoring, PE sheathed power cables.
Copper (aluminum) core, XLPE insulated, steel wire armoring, PVC sheathed power Cables.
Copper (aluminum) core, XLPE insulated, steel wire armoring, PE sheathed power cables
Rated voltage: 0.6/1kV, 3.6/6kV.
Number of cores: 1 to 6.
Relative manufacturing standards: IEC60505, BS, DIN.

Packing: Wooden drum, steel wooden drum.

Power Cable
-Conductor:
Solid or stranded copper
-Insulation:
Cross-linked polyethylene( XLPE or PVC)
-Circuit Identication:
The insulation shall be red, black
-Filler:
Polypropylene lament with lapped binding tape
-Inner Sheath:
Polyvinyl chloride (Black)
-Armor:
Galvanized steel wire
-Core-covering:
Binding tape
-Outer Sheath:
Polyvinyl chloride (Black)
-Application:
For use in ducts, trays and direct burial in ground. The cable is subject to immerse in water all the time.
-Standards / Testing Specications:
IEC 60502-1.

Type		Description	Application n
Cu	Al	Description	Application n
YJV	YJLV	XLPE insulation PVC sheath power cable	To be laid indoors, in tunnel or pipe, the cable couldn’t bear mechanical force outside
YJY	YJLY	XLPE insulation PE sheath power cable
YJV22	YJLV22	XLPE insulation, steel tape armor, PVC sheath power cable	To be laid underground, the cable could bear certain mechanical force, but it couldn’t bear great pulling force.
YJV23	YJLV23	XLPE insulation, steel tape armor, PE sheath power cable
YJV62	YJLV62	XLPE insulation, have no the magnetism steel tape armor, PE sheath power cable
YJV32	YJLV32	XLPE insulation, thin steel-wire armor, PVC sheath power cable	Be applicable to the water inside well and fall in the bad soil, the cable cans bear the equal dint outside the machine with pull the dint .
YJV72	YJLV72	XLPE insulation, have no the magnetism thick steel-wire armor, PVC sheath power cable
YJV42	YJLV42	XLPE insulation, thick steel-wire armor, PVC sheath power cable	Be applicable to the underwater with the bottom of sea, the cable cans bear the bigger pressure with lead to pull the dint.
Special Note	The single-core magnetism material packs the cable is not suitable for to use for the AC power supply back track, the necessity hour eligibility uses the single-core 62 or 72 type pack the cable. Disallow the cent to cross the magnetism piping mutually when single-core cable establish, the in order to prevent results in the descent that cable transport electric current ability.

Related Product:

Packing:
1.We guarantee to ship goods out 5-10 working days after payment confirmation.
2.If you didn’t receive the item after 30 days,please feel free to contact us.We will make all our to resolve the problem.
Warranty:
  1.For wrong shipped items, Please contact us, We will arrange to deliver the correct items.
2.For defective or faulty products,please contact us first,We will resolved your issues,thanks !
     FAQ
Q:How to order
1. Please tell us what kind of model you need.
2. We make Proforma Invoice to you.
3. Please check and confirm the Proforma Invoice.
4.Once we confirmed the order,please pay it soon.
5. After payment , all goods will be sent  within 10 working days as usual.
Q. The MOQ
I am glad to accept a small order to test the market,While kindly remind, the more the quantity, the better the price.
Q:What is the quality of the goods
Please trust us without any doubt ,all products we produce with CE,PCCC,SABS,certified .
Q. If rigid conductor cable was not I want, what should I do?
If you find this rigid conductor cable is not exactly meet what you need. Please send us emails about your inquiry details. We will give you solution within 2 hours!

Advantage:
We have a very strict quality controling system which promise that cable we produce are always of best quality!Of course , if you have some good ideas that you want us to develop or reproduced, please feel free to send us your product image or design artwork, we are also pleased to become your Original Equipment Manufacture.We not only promise the good quality but also stable quality . Customer no need usually change suppliers again!We are sincerely looking for your cooperation!