Qualität Kurbelgehäuse-Belüftung obenliegendes ABC-Isolierkabel
Produktdetails
Basis Info
Modell Nr.:ABC
Art: Isolierte
Leitertyp: Stranded
Anwendung: Oben
Leitermaterial: Aluminium
Mantelmaterial: PVC
Isoliermaterial: XLPE
Bescheinigung: ISO9001 , CE
Zusätzliche Informationen.
Warenzeichen:Jiapu
Verpackung:Wooden Drums
Standard:IEC, ASTM, DIN, BS, GB, Any standard
Herkunft:Henan, China
HS-Code:4101962331
Produktionskapazität:5000 Kilometer/Month
Produktbeschreibung
Qualität Kurbelgehäuse-Belüftung obenliegendes ABC-Isolierkabel
Anwendung:
Das Kabel als Neutyp Luftkabel wird für das Übertragen von Unkosten des elektrischen Stroms verwendet, weitgehend verwendet beim Wiederaufbau der städtischer und Waldregion elektrifizierten Drahtfiletarbeit. Es verbessert die Sicherheit und das Vertrauen der elektrifizierten Drahtfiletarbeit
Standard:
IECA S-476, N-Düngung C33-209, GB 12527-90
Aufbau:
Phasen-/Energienkern: Aluminium/Kupfer + XLPE/PE Isolierungen
Nullmessager/Leiter: AAC, ACSR, galvanzied Stahldraht, AAAC
Mit oder ohne
Aluminiumleiter mit der XLPE/PE Isolierung (wahlweise freigestellt)
Bedingung:
(1) selbsttragend
| Phase | Phase | Phase | Approx.Overall Durchmesser | Max. Gleichstrom-Widerstand des Leiters an 20ºC | |||
| AAC+UV-XLPE | Kompakter Leiter | UV-XLPE Isolierung | |||||
| No.X normaler Querschnitt von Kernen | No.of Al-Drähte | Gesamtdurchmesser | Normale Stärke | Min. | Durchmesser | ||
| Nr. x mm2 | – | mm | mm | mm | mm | mm | ohm/km |
| 1 x 10 | 7 | 4.05 | 1.0 | 0.8 | 6.05 | 6.05 | 3.08 |
| 1 x 16 | 7 | 4.8 | 1.2 | 0.98 | 7.2 | 7.20 | 1.91 |
| 1 X.25 | 7 | 6 | 1.2 | 0.98 | 8.4 | 8.40 | 1.20 |
| 1 x 35 | 7 | 7.0 | 1.4 | 1.16 | 9.8 | 9.80 | 0.868 |
| 1 x 50 | 7 | 8.3 | 1.4 | 1.16 | 11.1 | 11.10 | 0.641 |
| 1 x 70 | 19 | 9.8 | 1.4 | 1.16 | 12.6 | 12.60 | 0.443 |
| 1 x 95 | 19 | 11.6 | 1.6 | 1.34 | 14.8 | 14.80 | 0.320 |
| 1 x 120 | 19 | 13 | 1.6 | 1.34 | 16.2 | 16.20 | 0.253 |
| 1 x 150 | 19 | 14.6 | 1.8 | 1.52 | 18.2 | 18.20 | 0.206 |
| 1 x 185 | 6 | 16.2 | 2.0 | 1.70 | 20.2 | 20.20 | 0.164 |
| 1 x 240 | 6 | 18.4 | 2.2 | 1.88 | 22.8 | 22.80 | 0.125 |
| 2 x 10 | 7 | 4.05 | 1.0 | 0.8 | 6.05 | 12.10 | 3.08 |
| 2 x 16 | 7 | 4.8 | 1.2 | 0.98 | 7.2 | 14.40 | 1.91 |
| 2 X.25 | 7 | 6 | 1.2 | 0.98 | 8.4 | 16.80 | 1.20 |
| 2 x 35 | 7 | 7.0 | 1.4 | 1.16 | 9.8 | 19.60 | 0.868 |
| 2 x 50 | 7 | 8.3 | 1.4 | 1.16 | 11.1 | 22.20 | 0.641 |
| 2 x 70 | 19 | 9.8 | 1.4 | 1.16 | 12.6 | 25.20 | 0.443 |
| 2 x 95 | 19 | 11.6 | 1.6 | 1.34 | 14.8 | 29.60 | 0.320 |
| 2 x 120 | 19 | 13 | 1.6 | 1.34 | 16.2 | 32.40 | 0.253 |
| 2 x 150 | 19 | 14.6 | 1.8 | 1.52 | 18.2 | 36.40 | 0.206 |
| 2 x 185 | 6 | 16.2 | 2.0 | 1.70 | 20.2 | 40.40 | 0.164 |
| 2 x 240 | 6 | 18.4 | 2.2 | 1.88 | 22.8 | 45.60 | 0.125 |
| 3 x 10 | 7 | 4.05 | 1.0 | 0.8 | 6.05 | 13.07 | 3.08 |
| 3 x 16 | 7 | 4.8 | 1.2 | 0.98 | 7.2 | 15.55 | 1.91 |
| 3 X.25 | 7 | 6 | 1.2 | 0.98 | 8.4 | 18.14 | 1.20 |
| 3 x 35 | 7 | 7.0 | 1.4 | 1.16 | 9.8 | 21.17 | 0.868 |
| 3 x 50 | 7 | 8.3 | 1.4 | 1.16 | 11.1 | 23.98 | 0.641 |
| 3 x 70 | 19 | 9.8 | 1.4 | 1.16 | 12.6 | 27.22 | 0.443 |
| 3 x 95 | 19 | 11.6 | 1.6 | 1.34 | 14.8 | 31.97 | 0.320 |
| 3 x 120 | 19 | 13 | 1.6 | 1.34 | 16.2 | 34.99 | 0.253 |
| 3 x 150 | 19 | 14.6 | 1.8 | 1.52 | 18.2 | 39.31 | 0.206 |
| 3 x 185 | 6 | 16.2 | 2.0 | 1.70 | 20.2 | 43.63 | 0.164 |
| 3 x 240 | 6 | 18.4 | 2.2 | 1.88 | 22.8 | 49.25 | 0.125 |
| 4 x 10 | 7 | 4.05 | 1.0 | 0.8 | 6.05 | 14.64 | 3.08 |
| 4 x 16 | 7 | 4.8 | 1.2 | 0.98 | 7.2 | 17.42 | 1.91 |
| 4 X.25 | 7 | 6 | 1.2 | 0.98 | 8.4 | 20.33 | 1.20 |
| 4 x 35 | 7 | 7.0 | 1.4 | 1.16 | 9.8 | 23.72 | 0.868 |
| 4 x 50 | 7 | 8.3 | 1.4 | 1.16 | 11.1 | 26.86 | 0.641 |
| 4 x 70 | 19 | 9.8 | 1.4 | 1.16 | 12.6 | 30.49 | 0.443 |
| 4 x 95 | 19 | 11.6 | 1.6 | 1.34 | 14.8 | 35.82 | 0.320 |
| 4 x 120 | 19 | 13 | 1.6 | 1.34 | 16.2 | 39.20 | 0.253 |
| 4 x 150 | 19 | 14.6 | 1.8 | 1.52 | 18.2 | 44.04 | 0.206 |
| 4 x 185 | 6 | 16.2 | 2.0 | 1.70 | 20.2 | 48.88 | 0.164 |
| 4 x 240 | 6 | 18.4 | 2.2 | 1.88 | 22.8 | 55.18 | 0.125 |
(2) Phase + neutrale Person
| Phase | Null | Phase | Null | Approx.Overall Durchmesser | Max. Gleichstrom-Widerstand des Leiters an 20ºC | ||||
| AAC+UV-XLPE | AAAC | Kompakter Leiter | UV-XLPE Isolierung | Leiter | |||||
| Phase | Null | ||||||||
| No.X normaler Querschnitt von Kernen | No.X normaler Querschnitt von Kernen | No.of Al.Wire | Gesamtdurchmesser | Normale Stärke | Min. | Nr./Durchmesser des Al-Legierungs-Drahts | |||
| Nr. x mm2 | Nr. x mm2 | – | mm | mm | Min. | No./mm | mm | ohm/km | ohm/km |
| 1 x 16 | 1 x 16 | 7 | 4.8 | 1.2 | 0.98 | 7/1.70 | 12.30 | 1.91 | 2.217 |
| 1 X.25 | 1 X.25 | 7 | 6 | 1.2 | 0.98 | 7/2.10 | 14.70 | 1.20 | 1.393 |
| 1 x 35 | 1 x 35 | 7 | 7.0 | 1.4 | 1.16 | 7/2.50 | 17.30 | 0.868 | 1.007 |
| 1 x 50 | 1 x 50 | 7 | 8.3 | 1.4 | 1.16 | 7/3.00 | 20.10 | 0.641 | 0.744 |
| 1 x 70 | 1 x 70 | 19 | 9.8 | 1.4 | 1.16 | 7/3.50 | 23.10 | 0.443 | 0.514 |
| 1 x 95 | 1 x 95 | 19 | 11.6 | 1.6 | 1.34 | 19/2.50 | 27.30 | 0.320 | 0.371 |
| 1 x 120 | 1 x 120 | 19 | 13 | 1.6 | 1.34 | 19/2.80 | 30.20 | 0.253 | 0.294 |
| 1 x 150 | 1 x 150 | 19 | 14.6 | 1.8 | 1.52 | 37/2.25 | 33.95 | 0.206 | 0.239 |
| 1 x 185 | 1 x 185 | 6 | 16.2 | 2.0 | 1.70 | 37/2.50 | 37.70 | 0.164 | 0.190 |
| 1 x 240 | 1 x 240 | 6 | 18.4 | 2.2 | 1.88 | 61/2.25 | 43.05 | 0.125 | 0.145 |
| 2 x 16 | 1 x 16 | 7 | 4.8 | 1.2 | 0.98 | 7/1.70 | 14.04 | 1.91 | 2.217 |
| 2 X.25 | 1 X.25 | 7 | 6 | 1.2 | 0.98 | 7/2.10 | 16.63 | 1.20 | 1.393 |
| 2 x 35 | 1 x 35 | 7 | 7.0 | 1.4 | 1.16 | 7/2.50 | 19.51 | 0.868 | 1.007 |
| 2 x 50 | 1 x 50 | 7 | 8.3 | 1.4 | 1.16 | 7/3.00 | 22.46 | 0.641 | 0.744 |
| 2 x 70 | 1 x 70 | 19 | 9.8 | 1.4 | 1.16 | 7/3.50 | 25.70 | 0.443 | 0.514 |
| 2 x 95 | 1 x 95 | 19 | 11.6 | 1.6 | 1.34 | 19/2.50 | 30.31 | 0.320 | 0.371 |
| 2 x 120 | 1 x 120 | 19 | 13 | 1.6 | 1.34 | 19/2.80 | 33.41 | 0.253 | 0.294 |
| 2 x 150 | 1 x 150 | 19 | 14.6 | 1.8 | 1.52 | 37/2.25 | 37.55 | 0.206 | 0.239 |
| 2 x 185 | 1 x 185 | 6 | 16.2 | 2.0 | 1.70 | 37/2.50 | 41.69 | 0.164 | 0.190 |
| 2 x 240 | 1 x 240 | 6 | 18.4 | 2.2 | 1.88 | 61/2.25 | 47.41 | 0.125 | 0.145 |
| 3 x 16 | 1 x 16 | 7 | 4.8 | 1.2 | 0.98 | 7/1.70 | 16.15 | 1.91 | 2.217 |
| 3 X.25 | 1 X.25 | 7 | 6 | 1.2 | 0.98 | 7/2.10 | 19.06 | 1.20 | 1.393 |
| 3 x 35 | 1 x 35 | 7 | 7.0 | 1.4 | 1.16 | 7/2.50 | 22.32 | 0.868 | 1.007 |
| 3 x 50 | 1 x 50 | 7 | 8.3 | 1.4 | 1.16 | 7/3.00 | 25.59 | 0.641 | 0.744 |
| 3 x 70 | 1 x 70 | 19 | 9.8 | 1.4 | 1.16 | 7/3.50 | 29.22 | 0.443 | 0.514 |
| 3 x 95 | 1 x 95 | 19 | 11.6 | 1.6 | 1.34 | 19/2.50 | 34.42 | 0.320 | 0.371 |
| 3 x 120 | 1 x 120 | 19 | 13 | 1.6 | 1.34 | 19/2.80 | 37.87 | 0.253 | 0.294 |
| 3 x 150 | 1 x 150 | 19 | 14.6 | 1.8 | 1.52 | 37/2.25 | 42.56 | 0.206 | 0.239 |
| 3 x 185 | 1 x 185 | 6 | 16.2 | 2.0 | 1.70 | 37/2.50 | 47.25 | 0.164 | 0.190 |
| 3 x 240 | 1 x 240 | 6 | 18.4 | 2.2 | 1.88 | 61/2.25 | 53.63 | 0.125 | 0.145 |
(3) Phasen-+ Person-+ Service-Anschluss
| Phase | Null | Anschluss instandhalten | Phase | Null | Anschluss instandhalten | Approx.Overall Durchmesser des zusammengerollten Kabels | |||||
| AAC+UV-XLPE | AAAC+UV-XLPE | AAC+UV-XLPE | Leiter | UV-XLPE | Leiter | UV-XLPE | Kompakter Leiter | UV-XLPE | |||
| No.X normaler Querschnitt von Kernen | No.X normaler Querschnitt von Kernen | No.X normaler Querschnitt von Kernen | Nr. des Al-Drahts | Gesamtdurchmesser | Normal Stärke |
Nr./Durchmesser des Al-Drahts | Normal Stärke |
Nr. des Al-Drahts | Gesamtdurchmesser | Normal Stärke |
|
| Nr. x mm2 | Nr. x mm2 | Nr. x mm2 | – | mm | mm | mm | mm | No./mm | mm | mm | mm |
| 3 x 16 | 1 x 50 | 1 x 16 | 7 | 4.8 | 1.2 | 7/3.0 | 1.4 | 7 | 4.8 | 1.2 | 26.2 |
| 3 X.25 | 1 x 50 | 1 x 16 | 7 | 6 | 1.2 | 7/3.0 | 1.4 | 7 | 4.8 | 1.2 | 28.6 |
| 3 x 35 | 1 x 50 | 1 x 16 | 7 | 7.0 | 1.4 | 7/3.0 | 1.4 | 7 | 4.8 | 1.2 | 31.4 |
| 3 x 50 | 1 x 50 | 1 x 16 | 7 | 8.3 | 1.4 | 7/3.0 | 1.4 | 7 | 4.8 | 1.2 | 34 |
| 3 x 70 | 1 x 50 | 1 x 16 | 19 | 9.8 | 1.4 | 7/3.0 | 1.4 | 7 | 4.8 | 1.2 | 37 |
| 3 x 95 | 1 x 50 | 1 x 16 | 19 | 11.6 | 1.6 | 7/3.0 | 1.4 | 7 | 4.8 | 1.2 | 41.4 |
| 3 x 120 | 1 x 50 | 1 x 16 | 19 | 13 | 1.6 | 7/3.0 | 1.4 | 7 | 4.8 | 1.2 | 44.2 |
| 3 x 16 | 1 x 50 | 2 x 16 | 7 | 4.8 | 1.2 | 7/3.0 | 1.4 | 7 | 4.8 | 1.2 | 26.2 |
| 3 X.25 | 1 x 50 | 2 x 16 | 7 | 6 | 1.2 | 7/3.0 | 1.4 | 7 | 4.8 | 1.2 | 28.6 |
| 3 x 35 | 1 x 50 | 2 x 16 | 7 | 7.0 | 1.4 | 7/3.0 | 1.4 | 7 | 4.8 | 1.2 | 31.4 |
| 3 x 50 | 1 x 50 | 2 x 16 | 7 | 8.3 | 1.4 | 7/3.0 | 1.4 | 7 | 4.8 | 1.2 | 34 |
| 3 x 70 | 1 x 50 | 2 x 16 | 19 | 9.8 | 1.4 | 7/3.0 | 1.4 | 7 | 4.8 | 1.2 | 37 |
| 3 x 95 | 1 x 50 | 2 x 16 | 19 | 11.6 | 1.6 | 7/3.0 | 1.4 | 7 | 4.8 | 1.2 | 41.4 |
| 3 x 120 | 1 x 50 | 2 x 16 | 19 | 13 | 1.6 | 7/3.0 | 1.4 | 7 | 4.8 | 1.2 | 44.2 |
Contact us
Ähnlich oder verwandt
- No related articles
