Primary Ud Cable, 35 Kv, Al/Epr/Neutral/LLDPE (AEIC CS 8/ICEA S-94-649)

Produktdetails

Basis Info

Modell Nr.:Primary UD Cable

Anwendung: U-Bahn

Spannung: Nieder-und Mittelspannung Kabel

Strom: DC-Kabel

Material Form: Runddraht

Bescheinigung: ISO , CCC

Zusätzliche Informationen.

Warenzeichen:DingAn or OEM

Verpackung:Heated Steel-Wooden Drum/Steel Drum

Standard:SGS

Herkunft:Jiangsu Yixing, China

HS-Code:8544601200

Produktionskapazität:12000 Km/Year

Produktbeschreibung

Primary UD Cable, 35 KV, Al/EPR/Neutral/LLDPE (AEIC CS 8/ICEA S-94-649)
Applications:
Predominantly used for primary underground distribution; Suitable for use in wet or dry locations, direct burial, underground duct, and where exposed to sunlight. To be used at 15, 000 volts or less and at conductor temperatures not to exceed 90° C for normal operation.
Specifications:
Primary UD Cable meets or exceeds the following ASTM specifications:
B-3 Soft Annealed Copper Wire.
B-8 Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard or Soft.
B-230 Aluminum, 1350-H19 Wire for Electrical Purposes.
B-231 Aluminum 1350 Conductors, Concentric-Lay-Stranded.
B-609 Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes.
Primary UD Cable is manufactured to the latest edition of the following specifications, and in case of specification conflicts, in the order listed:
ANSI/ICEA S-94-649
AEIC CS-8
RUS U-1
Construction:
The phase conductor is concentrically stranded, compressed soft copper or 1350-H16/26 aluminum alloy. The cable is composed of the conductor with moisture block in the strands, covered by a semi-conducting cross-linked polyethylene strand shield, an ethylene propylene rubber primary insulation, and a semi-conducting cross-linked polyethylene insulation shield. Conductors are available with either 100% or 133% insulation levels. A concentric neutral of bare copper wires and an insulating polyethylene jacket is applied over the insulation shield. The cable is identified by surface print on the jacket and with the lightning bolt symbol for supply cables indented in the jacket. A semi-conducting polyethylene jacket is available upon request.
Maximum Conductor Normal Operation: – 90O C;
Emergency Overload: – 130O C
Temperatures: Short Circuit – 250 C
Application: Medium voltage power cable for single phase underground distribution (UD), including getaway systems in low profile substations. Application:

Features: 1. Simultaneous extrusion of strand shield, insulation, and insulation shield (triple extrusion, dry curing process) forms a virtually perfect cable core, eliminating unequal electrical stress.
2. Ethylene Propylene Rubber (EPR) insulation offers: Excellent heat, moisture and corona resistance; Electrical stability under stress; Low dielectric loss, chemical resistance.

1/3 Neutral								Full Neutral
Size AWG or kcmil	Number of Strands	Nominal OD Over Insulation in	Number of Wires	Size AWG	Jacket Thickness mil	Approximate Outside Diameter in	Approximate Net Weight lb/kft	Size AWG or kcmil	Number of Strands	Nominal OD Over Insulation in	Number of Wires	Size AWG	Jacket Thickness mil	Approximate Outside Diameter in	Approximate Net Weight lb/kft
Aluminum 100% Insulation Level (345 mil)
1/0	1	1.06	6	14	50	1.38	858	1/0	1	1.06	16	14	50	1.38	979
1/0	19	1.10	6	14	50	1.42	895	1/0	19	1.10	16	14	50	1.42	1015
2/0	19	1.14	7	14	50	1.47	971	2/0	19	1.14	20	14	50	1.47	1127
3/0	19	1.19	9	14	50	1.52	1070	2/0	19	1.14	13	12	50	1.50	1167
4/0	19	1.25	11	14	50	1.57	1184	3/0	19	1.19	25	14	50	1.52	1263
250	37	1.30	13	14	80	1.69	1358	3/0	19	1.19	16	12	50	1.55	1300
350	37	1.40	18	14	80	1.79	1604	4/0	19	1.25	32	14	50	1.57	1437
500	37	1.53	25	14	80	1.95	1989	4/0	19	1.25	20	12	50	1.61	1468
500	37	1.53	16	12	80	1.99	2036	4/0	19	1.25	13	10	80	1.71	1592
750	61	1.74	24	12	80	2.19	2628	250	37	1.30	25	12	80	1.73	1716
750	61	1.74	15	10	80	2.24	2684	250	37	1.30	16	10	80	1.77	1772
1000	61	1.89	31	12	80	2.34	3139	350	37	1.40	32	12	80	1.83	2038
1000	61	1.89	20	10	80	2.38	3217	350	37	1.40	20	10	80	1.87	2084
1000	61	1.89	16	9	80	2.41	3260	350	37	1.40	16	9	80	1.89	2119
–	–	–	–	–	–	–	–	500	37	1.53	29	10	80	2.03	2667
–	–	–	–	–	–	–	–	750	61	1.74	28	8	80	2.29	3661
–	–	–	–	–	–	–	–	1000	61	1.89	37	8	80	2.44	4483
Aluminum 133% Insulation Level (420 mil)
1/0	19	1.25	6	14	50	1.57	1076	1/0	19	1.25	16	14	50	1.57	1196
2/0	19	1.29	7	14	50	1.62	1157	2/0	19	1.29	20	14	80	1.68	1380
3/0	19	1.34	9	14	80	1.73	1331	2/0	19	1.29	13	12	80	1.71	1424
4/0	19	1.40	11	14	80	1.79	1454	3/0	19	1.34	25	14	80	1.73	1524
250	37	1.45	13	14	80	1.84	1571	3/0	19	1.34	16	12	80	1.76	1566
350	37	1.56	18	14	80	1.98	1876	4/0	19	1.40	32	14	80	1.79	1707
500	37	1.68	25	14	80	2.11	2235	4/0	19	1.40	20	12	80	1.82	1743
500	37	1.68	16	12	80	2.14	2285	4/0	19	1.40	13	10	80	1.86	1805
750	61	1.89	24	12	80	2.34	2902	250	37	1.45	25	12	80	1.88	1933
750	61	1.89	15	10	80	2.39	2963	250	37	1.45	16	10	80	1.92	1992
1000	61	2.04	16	9	80	2.56	3560	350	37	1.56	32	12	80	2.01	2314
–	–	–	–	–	–	–	–	350	37	1.56	20	10	80	2.05	2365
–	–	–	–	–	–	–	–	350	37	1.56	16	9	80	2.08	2403
–	–	–	–	–	–	–	–	500	37	1.68	29	10	80	2.18	2920